Power Tools
Brand: AIRCRAFT
MPN: AT0030-SK06
AIR NAILER S/KIT VALVE & PLUNGER (28/32-33/35-36) FOR AT0030....
N$ 145.48
Ex VAT:N$ 126.50
Brand: AIRCRAFT
MPN: AT0024-SK03
AirCraft Air Needle Scal. Service Kit Barrel & Housing (1,11) For AT0024 (AT0024-SK03)
At a Glance: Replacement barrel and housing components (Parts 1 & 11) for the AirCraft AT0024—restores tool structure, alignment and dependable scaling performance.
A needle scaler hits hard—by design. That repeated impact loads the barrel and housing constantly, and over time the tool body can take wear, thread damage, knocks, or distortion that affects alignment. When the body isn’t straight and secure..
N$ 392.15
Ex VAT:N$ 341.00
Brand: AIRCRAFT
MPN: AT0024-SK01
AirCraft Air Needle Scal. Service Kit Lift Rod Comp. (2,7,12-15) For AT0024 (AT0024-SK01)
At a Glance: Lift rod and sealing component service kit (Parts 2, 7, 12–15) for the AirCraft AT0024—helps restore airtight control and consistent scaling action.
Needle scalers are brutally effective tools, but they rely on a small set of internal control and sealing parts to keep that rapid impact action consistent. When those seals wear or the lift rod components get tired, you’ll notice it quickly:..
N$ 30.59
Ex VAT:N$ 26.60
Brand: AIRCRAFT
MPN: AT0024-SK02
AirCraft Air Needle Scal. Service Kit Repl. Needles 12pce (9) For AT0024 (AT0024-SK02)
At a Glance: 12-piece replacement needle set (Part 9) for the AirCraft AT0024—restores aggressive cleaning action for rust, paint and welding slag removal.
Needle scalers are only as effective as the needles doing the striking. Over time, needles wear down, round off, or shorten—meaning less bite, slower cleaning, more vibration, and more time spent on a job that should’ve been quick.
The AirCraft AT002..
N$ 61.41
Ex VAT:N$ 53.40
Brand: AIRCRAFT
MPN: AT0024-SK06
AirCraft Air Needle Scal. Service Kit Rod & Needle Seat (8,10) For AT0024 (AT0024-SK06)
At a Glance: Rod and needle seat kit (Parts 8 & 10) for the AirCraft AT0024—supports correct needle seating for smoother movement and consistent scaling impact.
A needle scaler works by converting rapid internal motion into a controlled “hammering” of the needle bundle. For that to happen cleanly, the needles must sit correctly and move freely. When the rod or needle seat wears, you can get uneven strik..
N$ 147.20
Ex VAT:N$ 128.00
Brand: AIRCRAFT
MPN: AT0024-SK04
AirCraft Air Needle Scal. Service Kit Trigger Comp. (16-17) For AT0024 (AT0024-SK04)
At a Glance: Trigger and pin component kit (Parts 16 & 17) for the AirCraft AT0024—restores smooth trigger action and dependable control during scaling.
A needle scaler is a high-impact tool, so control matters. If the trigger is bent, loose, sticky, or not returning properly, the tool becomes harder to manage and less predictable—especially when you’re working around welds, edges, or tight spaces.
The Ai..
N$ 19.09
Ex VAT:N$ 16.60
Brand: AIRCRAFT
MPN: AT0024-SK05
AirCraft Air Needle Scal. Service Kit Valve / Piston / Cylinder (3-6) For AT0024 (AT0024-SK05)
At a Glance: Valve, piston and cylinder service kit (Parts 3–6) for the AirCraft AT0024—restores internal drive efficiency for stronger, smoother scaling performance.
If a needle scaler loses its punch, the problem is usually deeper than the needles. The heart of the tool is its valve and piston system—controlling airflow and converting it into the rapid, hard-hitting reciprocating motion that st..
N$ 501.98
Ex VAT:N$ 436.50
Brand: AIRCRAFT
MPN: AT0024
AirCraft Air Needle Scaler For Removing Paint, Rust, Dirt Or Welding Slag (AT0024)
At a Glance: Pneumatic needle scaler for aggressive surface cleaning—strips rust, paint and slag fast while reaching irregular shapes and tight areas.
Some jobs don’t need gentle sanding—they need controlled, rapid impact. The AirCraft AT0024 Air Needle Scaler is built for heavy-duty surface preparation where paint, rust, dirt and welding slag must go. Multiple hardened needles strike the surface at high fre..
N$ 1,327.10
Ex VAT:N$ 1,154.00
Brand: AIRCRAFT
MPN: AT0009
1/3 sheet orbital sander - 95x175mm
The orbital sander, also known as a Jitterbug, makes use of 1/3 sheet
abrasives that can be securely held in place with locking clamps in the front
and back.
A dead man's throttle switch is fitted on top for safety. The sander has a
contoured palm grip that allows for one handed sanding.
A compressor is required with an air flow delivery of at least 170 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line..
N$ 1,145.40
Ex VAT:N$ 996.00
Brand: AIRCRAFT
MPN: AT0011
AirCraft Air Orbital Sander 150mm Hook And Loop With Dust Extraction (AT0011)
At a Glance: 150mm pneumatic orbital sander with hook-and-loop pad and built-in dust extraction for cleaner, finer finishing.
Get a smoother finish with less mess using the AirCraft AT0011 Air Orbital Sander. Built around a 150mm hook-and-loop sanding pad for fast disc changes, this air-powered sander is ideal for surface preparation and finishing work where control matters. The integrated dust extraction helps kee..
N$ 1,566.88
Ex VAT:N$ 1,362.50
Brand: AIRCRAFT
MPN: AT0014-SK02
AirCraft Air Palm Sander Service Kit Bearings Var (AT0014-SK02)
At a Glance: Bearing service kit for the AirCraft AT0014 150mm palm/orbital sander—replaces worn bearings for smoother running and better finish control.
The AirCraft AT0014-SK02 bearing service kit is the go-to fix when your palm sander starts sounding rough, vibrating more than usual, or losing that smooth “glide” across a surface. Bearings take a beating in pneumatic sanders—dust, heat and constant rotation eventually cause wea..
N$ 377.78
Ex VAT:N$ 328.50
Brand: AIRCRAFT
MPN: AT0014-SK05
AirCraft Air Palm Sander Service Kit Cyl & Rotor (AT0014-SK05)
At a Glance: Major service kit for the AirCraft AT0014 150mm palm/orbital sander—includes cylinder and rotor components for a full motor refresh.
When a pneumatic sander loses its bite, the issue is often deeper than seals and bearings. The AirCraft AT0014-SK05 cylinder and rotor service kit is designed to rebuild the motor section of your AT0014 150mm palm sander—bringing back smooth power delivery, stable speed and cleaner sandin..
N$ 283.48
Ex VAT:N$ 246.50